Don't
risk your back loading your motor scooter, motorcycle,
mobility scooter or powered wheelchair on to your Truck or RV.
Call to ORDER Toll-Free

Make it safe and easy with the Versa-Lift for Trucks SUVs and Motorhomes
![]() |
![]() |
![]() |
![]() |
![]() Simply lower the lift to the ground, load the motorcycle, scooter, wheelchair mobility cart, or other equipment! Tie down your load, and push the button, the wireless remote makes it hands-free lifting to take it with you. |
![]() Optional Porting tubes for a three receiver system and the optional wheel chock are shown at the right. Porting tubes option increases load to 650 Lbs. |
![]() |
|
Versa-Lift is: A motorcycle lift - A mobility scooter lift A cargo lift - A power wheelchair lift Or THE whatever you want to lift and take with you tool. |
Allowing one person to load or unload your scooter wheel chair or motorcycle at ground level, makes the Versa-Lift the ultimate in safety and convenience. |
![]() |
![]() Mobility Lift for cars, Minivans, Trucks and Motorhomes offers you the ultimate in quiet convenience and independence. It requires no disassembly of your 3 or 4-wheel electric scooter or wheelchair — simply drive it on, attach the safety harness, lift it, and you are on your way. The Mobility-Lift raises and locks any scooter in place on the back of your vehicle in just 60 seconds. Standard lifts 18 inches verticle and the motorhome lifts 24". The tray is 26 X 40 inches and the unit weights less than 65 pounds. Lifts up to 300 pounds. |
|
Just sit down, strap in and press the button. The Handy-Chair will easily lift you up to 30 inches at a safe, even lifting speed. The Handy-Chair platform folds and locks away for traveling, and there is an emergency crank handle in case of battery failure. 12 volt DC or optional 110 volt AC (110 VAC not recommended for outdoor use where moisture & condensation can occur) Lifts up to 300 pounds up to 30" on a 251/2" x 26" platform in less than a minute (not designed for wheelchair use) Black powder coat for extra protection - Mounting brackets included - Wireless remote control Vertical stroke lengths of more than 30" are available by special order. Shipping weight of 147 pounds in 6 cartons which can be shipped via UPS |
|
|
![]() |
![]() |
![]() |
|
The RAMPAGE installs easily. The Standard lift is 95" long, and 24" wide.
Front tire cradle is 6" wide and sits 7" above truck bed. A bar is attached with
two bolts through the floor and bed frame at the front of the truck bed. For all
pickups, 4 holes are drilled through the floor and bed frame. Route the all weather
cable from this bar, to the truck's battery. The pre-assembled lift together with
the winch motor is then slid into the truck bed and attached to the bar with two
additional .5" bolts. Plug into the quick disconnect and you're ready to go. When
in use, the tailgate must be removed on 8 foot beds and placed in the down position
on shorter beds. Complete instructions are included with each lift. $2,795.00 plus truck freight $350. Click Here to order |

![]() 4ft Trailers in Black White or All Diamond plate weight about 175 pounds with a 48 X 28 by 19 deep box, They pull great and look great too. $1495.00 as shown + Freight |
![]() ![]() |
|
![]() 5ft Trailers in Black White or All Diamond plate weight about 200 pounds with a 60 X 28 by 19 deep box, $1695.00 as shown + Freight |